Espresso Coffee Recipe Series - Recipe 52

0.

381

gm/l

Extraction scale from least to most, with an X marking where espresso recipe 52 sits

If you haven’t measured your beans, treat this recipe as a starting guess. If you have, it’s usually right first time, and almost always within one change. The espresso coffee recipe series is designed for this: taste your shot, then move up the series for more extraction or down for less. Don’t hesitate to experiment with another recipe based on your taste test results—finding what tastes best for you is worth it!

Espresso Coffee Recipe Series Settings

Flat white with swan latte art in a turquoise cup and saucer with a teaspoon

308

μm

358

μm

20

gm

89

°C

46

gm

223

°C

Medium Dark/Dark Roast

Espresso directions

Don’t get hung up on the details. If you can’t change your pressure, maybe you don’t have a complete set of baskets, you don’t know what that grind size even means. It doesn’t matter.

Providing you are changing the dose, the yield, the ratio, the bits you can, you will be changing the TASTE, and that is what matters. YOU are finding a RECIPE that tastes better than the last recipe you tried.

1.

Pre-heat your espresso machine, portafilter, basket, and coffee cup.

2.

Get your single dose out of the freezer. If you are not single-dosing and freezing your coffee, read How to Store Coffee Beans – 9 tips. While at it, read Best Coffee Beans – Six Purchasing Tips.

Shots of espresso these days are nearly always a double shot of espresso. Double shots are now the standard in America and many places worldwide. A single shot of espresso is scarce. Traditionally, a single shot (solo) of espresso uses about 7g of espresso-fine grounds. If you want to make a single, pull a double, but use a split portafilter to halve the shot.

3.

Use RDT by giving them a spritz of water and stirring them. Moisture reduces static electricity, clumping, retention and waste and produces stronger flavours (read the paper).

4.

Grind your frozen coffee; do not defrost it. Either grind into an espresso shaker funnel or using a dosing funnel, grind it into the right-sized basket in a naked portafilter.

5.

Puck prep: I use a WDT tool to break up clumps and redistribute them. I use a levelling tool and a levelling palm tamper. Then, I cover it with a shower screen to help evenly distribute the water.

6.

Place the scales under your cup, tare, and start the timer.

7.

Increase the pressure to 0 bar and stop at the first drip.  You’ll find this hard without a manual lever espresso machine such as a Flair58+.

Pre-infusion is critical; it is where most of the extraction occurs, and just like the bloom phase in filter coffee, it needs a good 30-60 seconds. If your coffee is fresh and you stored it frozen, it needs to degas and have plenty of time to extract all the good stuff. You are NOT in a hurry.

You can monitor the extraction, use a mirror to watch the bottom of the naked portafilter, but really you just need to see the first drip hit the cup, then stop and wait. 

You are NOT looking for those old-fashioned things: convergence streams, avoiding spritzes, colour progression, blonding point, cut-off signals. That was all wrong.

After the preinfusion bloom phase, wash off the extraction with a steady flow rate.


It is your choice to push hard and intentionally get a bit of crema bitterness, good for latte art, or go slow and avoid pushing through fines. 

Stop the shot once you have reached your target yield. The extraction time is meaningless.

Adjusting your grind size isn’t as important.

Using an Oxo Rapid Brewer? You can make an espresso-strength concentrate with this recipe’s dose and ratio. Add the Oxo brew water shown above (the yield plus an allowance for the water the grounds hold back). Push gently and stop at the first drip, wait 60 seconds to bloom and extract, then pump until bubbles start to appear. You should end up with the right yield for the dose and ratio.

8.

Now, the most crucial step. Before adding milk, stir the espresso and crema, dip a teaspoon in and taste (you don’t need a spoonful; it just needs to be wet). Is the coffee sour? If so, next time you make this coffee, extract more using the recipe indicated by the button above.

9.

If the coffee isn’t sour, ask yourself whether it is very bitter. Bitterness is harder to judge because all coffee is bitter to some extent. However, you can reduce bitterness by extracting less. Go too far, and it will turn sour. You are looking for the calm spot in between. Just above sour tastes best. If you need to reduce bitterness next time you make this coffee, extract less by using the recipe indicated by the button above.

10.

Add the bypass hot water (optional). Adding hot water reduces the blanket of milk and increases the coffee’s apparent strength while keeping the volume up.

11.

Add the steamed milk. Espresso con panna (whipped cream) may be a little OTT, but adding 5-10ml of cream to your milk before steaming can help the body and taste. Another great option is adding 15% coconut milk.

An example of a coffee I'm drinking

Finca Potosí – Rigoberto Herrera, Sidra Honey (Colombia)

This is an excellent coffee; Sidra is one of the most sought-after varieties in specialty coffee, Rigoberto Herrera planted it after a visit to Ecuador, the black honey process is rich and round, and it is roasted by La Cabra in Denmark. If you haven’t tried it, don’t miss out, grab some here: Sidra – La Cabra

Rich & round – Finca Potosí reminds us of stone fruit and raisin

 

About the producer

Finca Potosí is part of Café Granja La Esperanza, near Caicedonia in Valle del Cauca. Rigoberto Herrera, inspired by a 2016 trip to Ecuador, started planting Sidra in 2017, and now has nearly 4,000 plants across 1.5 hectares. This is the fifth year La Cabra has bought Sidra from Potosí, and the first honey-processed lot.

About the region

Valle del Cauca is in western Colombia, a region with a long coffee tradition and, increasingly, a place for experimental varieties. The farm grows at 1,800 metres above sea level, and this lot was harvested in June 2026.

About the coffee

ORIGIN: CAICEDONIA, VALLE DEL CAUCA, COLOMBIA
PRODUCER: CAFÉ GRANJA LA ESPERANZA
FARM: FINCA POTOSÍ
ALTITUDE: 1,800 METRES ABOVE SEA LEVEL
VARIETY: SIDRA
PROCESS: BLACK HONEY

About the variety

Sidra is an Ecuadorian cultivar reported to have been developed in the 1990s in a breeding programme in northern Pichincha, and never formally released. It was long said to be Typica × Red Bourbon, and La Cabra describes it as combining the sweet character of Bourbon with the florals of Typica, though genetic testing suggests Ethiopian landrace ancestry. It won the 2019 World Barista Championship in the hands of Jooyeon Jeon of Momos Coffee.

About the process

In black honey processing, the skin is removed and nearly all the mucilage left on, then the coffee is dried slowly. That builds sweetness and body. La Cabra calls this a complex, rich and full honey Sidra, with stone fruit and raisin.

About the Roaster

La Cabra was founded in 2011 in Aarhus, Denmark. It roasts one profile per coffee for all brew methods, and suggests resting this coffee for 10 or more days after roasting. It is sold in 200 g and 1 kg bags.

Sidra – La Cabra

Model Version:

20261009.06

How you can help

I have a dream: that this might raise the standard of coffee-making globally, reduce dialling in waste, time, and frustration, and encourage people to explore more varieties and pay more attention to the producers. You might even be prepared to pay more for better coffee if it pleases you, returning more money to growers.

You can help. The best thing you can do is spread the word on other platforms, such as Reddit or Facebook coffee forums, and share with others how this method can solve everyday problems.

Using 0.1g accurate scales and the recommended 100ml measuring cylinder, and entering quality data into the form, helps improve the model. So does evidence-based feedback for parameter range adjustments.

You can also support the site financially via Buy me a coffee to help with ongoing running costs, site hosting fees, and plug-in subscriptions.