Espresso Coffee Recipe Series - Recipe 51

0.

380

gm/l

Extraction scale from least to most, with an X marking where espresso recipe 51 sits

There’s less than a 10% chance this recipe will be ideal for your roast level. However, if you’ve measured the density, your chances of success soar to 68%. The espresso coffee recipe series is designed for this: taste your shot, then move up the series for more extraction or down for less. Don’t hesitate to experiment with another recipe based on your taste test results—finding what tastes best for you is worth it!

Espresso Coffee Recipe Series Settings

Espresso

308

μm

358

μm

20

gm

89

°C

46

gm

224

°C

Medium Dark/Full City

Espresso directions

Don’t get hung up on the details. If you can’t change your pressure, maybe you don’t have a complete set of baskets, you don’t know what that grind size even means. It doesn’t matter.

Providing you are changing the dose, the yield, the ratio, the bits you can, you will be changing the TASTE, and that is what matters. YOU are finding a RECIPE that tastes better than the last recipe you tried.

1.

Pre-heat your espresso machine, portafilter, basket, and coffee cup.

2.

Get your single dose out of the freezer. If you are not single-dosing and freezing your coffee, read How to Store Coffee Beans – 9 tips. While at it, read Best Coffee Beans – Six Purchasing Tips.

Shots of espresso these days are nearly always a double shot of espresso. Double shots are now the standard in America and many places worldwide. A single shot of espresso is scarce. Traditionally, a single shot (solo) of espresso uses about 7g of espresso-fine grounds. If you want to make a single, pull a double, but use a split portafilter to halve the shot.

3.

Use RDT by giving them a spritz of water and stirring them. Moisture reduces static electricity, clumping, retention and waste and produces stronger flavours (read the paper).

4.

Grind your frozen coffee; do not defrost it. Either grind into an espresso shaker funnel or using a dosing funnel, grind it into the right-sized basket in a naked portafilter.

5.

Puck prep: I use a WDT tool to break up clumps and redistribute them. I use a levelling tool and a levelling palm tamper. Then, I cover it with a shower screen to help evenly distribute the water.

6.

Place the scales under your cup, tare, and start the timer.

7.

Increase the pressure to 0 bar and stop at the first drip.  You’ll find this hard without a manual lever espresso machine such as a Flair58+.

Pre-infusion is critical; it is where most of the extraction occurs, and just like the bloom phase in filter coffee, it needs a good 30-60 seconds. If your coffee is fresh and you stored it frozen, it needs to degas and have plenty of time to extract all the good stuff. You are NOT in a hurry.

You can monitor the extraction, use a mirror to watch the bottom of the naked portafilter, but really you just need to see the first drip hit the cup, then stop and wait. 

You are NOT looking for those old-fashioned things: convergence streams, avoiding spritzes, colour progression, blonding point, cut-off signals. That was all wrong.

After the preinfusion bloom phase, wash off the extraction with a steady flow rate.


It is your choice to push hard and intentionally get a bit of crema bitterness, good for latte art, or go slow and avoid pushing through fines. 

Stop the shot once you have reached your target yield. The extraction time is meaningless.

Adjusting your grind size isn’t as important.

Using an Oxo Rapid Brewer? You can make an espresso-strength concentrate with this recipe’s dose and ratio. Add the Oxo brew water shown above (the yield plus an allowance for the water the grounds hold back). Push gently and stop at the first drip, wait 60 seconds to bloom and extract, then pump until bubbles start to appear. You should end up with the right yield for the dose and ratio.

8.

Now, the most crucial step. Before adding milk, stir the espresso and crema, dip a teaspoon in and taste (you don’t need a spoonful; it just needs to be wet). Is the coffee sour? If so, next time you make this coffee, extract more using the recipe indicated by the button above.

9.

If the coffee isn’t sour, ask yourself whether it is very bitter. Bitterness is harder to judge because all coffee is bitter to some extent. However, you can reduce bitterness by extracting less. Go too far, and it will turn sour. You are looking for the calm spot in between. Just above sour tastes best. If you need to reduce bitterness next time you make this coffee, extract less by using the recipe indicated by the button above.

10.

Add the bypass hot water (optional). Adding hot water reduces the blanket of milk and increases the coffee’s apparent strength while keeping the volume up.

11.

Add the steamed milk. Espresso con panna (whipped cream) may be a little OTT, but adding 5-10ml of cream to your milk before steaming can help the body and taste. Another great option is adding 15% coconut milk.

An example of a coffee I'm drinking

Our Plot – Daterra, Aramosa Black Honey (Brazil)

This is an excellent coffee; Daterra is one of the most famous coffee farms in the world, Aramosa is a rare experimental variety, only six roasters worldwide are part of this project, and it is roasted by The Barn in Berlin. If you haven’t tried it, don’t miss out, grab some here: Our Plot Daterra – The Barn

Syrupy & creamy – Our Plot reminds us of cherry, blueberry, cola, oolong and vanilla

 

About the producer

Daterra is a farm in the Cerrado region of Brazil, known for its sustainability work. It is Rainforest Alliance certified and climate positive, with tree-planting programmes, and it treats its farm as a research laboratory for new varieties and processing. “Our Plot” is a five-year collaboration between The Barn and Daterra to explore the potential of Aramosa plants, with one hectare dedicated to the project and only six roasters in the world taking part.

About the region

The Cerrado is a savannah region of central Brazil with a distinct dry season, ideal for drying coffee. The plot is at 1,173 metres above sea level.

About the coffee

ORIGIN: CERRADO, BRAZIL
PRODUCER: DATERRA
ALTITUDE: 1,173 METRES ABOVE SEA LEVEL
VARIETY: ARAMOSA
PROCESS: BLACK HONEY

About the variety

Aramosa is an experimental variety that Daterra is still developing with research from the Instituto Agronômico (IAC). It is described as a cross involving Coffea racemosa, a wild relative, aimed at combining drought resistance and low caffeine with arabica flavour. It is reported to contain roughly half the caffeine of ordinary coffee, and still to be in a pre-cultivar stage, so seeds are not yet commercially available.

About the process

Black honey means the skin is removed but most of the mucilage is left on, and the seeds dry slowly on covered beds, developing a dark colour and concentrated sweetness. The Barn tastes cherry and blueberry with syrupy cola, then oolong tea and vanilla in a creamy finish.

About the Roaster

The Barn is a specialty roaster based in Berlin, Germany. Our Plot is sold in 250 g and 1 kg bags.

Our Plot Daterra – The Barn

Model Version:

20261009.06

How you can help

I have a dream: that this might raise the standard of coffee-making globally, reduce dialling in waste, time, and frustration, and encourage people to explore more varieties and pay more attention to the producers. You might even be prepared to pay more for better coffee if it pleases you, returning more money to growers.

You can help. The best thing you can do is spread the word on other platforms, such as Reddit or Facebook coffee forums, and share with others how this method can solve everyday problems.

Using 0.1g accurate scales and the recommended 100ml measuring cylinder, and entering quality data into the form, helps improve the model. So does evidence-based feedback for parameter range adjustments.

You can also support the site financially via Buy me a coffee to help with ongoing running costs, site hosting fees, and plug-in subscriptions.