Filter Coffee Recipe Series - Recipe 104

0.

433

gm/l

Extraction scale from least to most, with an X marking where espresso recipe 104 sits

If you haven’t measured your beans, treat this recipe as a starting guess. If you have, it’s usually right first time, and almost always within one change. The filter coffee recipe series is designed for this: taste your cup, then move up the series for more extraction or down for less. It works the same whether you brew with a V60, a Switch, a Kalita, an Origami or a cloth drip pot. Don’t hesitate to experiment with another recipe based on your taste test results—finding what tastes best for you is worth it!

Filter Coffee Recipe Series Settings

Hario V60 Switch dripper with a paper filter, brewing coffee into a cup on scales

Yield

190

ml

11.1

gm

17.2

DF54

54

Option-O P64

4.5

94

°C

03:43

min

196

°C

Light/Light City

Filter directions

Don’t get hung up on the details. A Switch, a V60, a Kalita, an Origami, a Deep 27 or a cloth drip pot: the settings are the same. If you don’t have the right grinder, or you don’t know what that grind size even means, it doesn’t matter.

Providing you are changing the dose, the ratio, the bits you can, you will be changing the TASTE, and that is what matters. YOU are finding a RECIPE that tastes better than the last recipe you tried.

1.

Pre-heat. Rinse the paper filter with hot water to wash out the paper taste and heat the brewer, then tip the rinse water out of your cup or carafe. Using cloth? Rinse it, wring it out, and never let it dry out between brews; keep it in water in the fridge.

2.

Get your single dose out of the freezer. If you are not single-dosing and freezing your coffee, read How to Store Coffee Beans – 9 tips. While at it, read Best Coffee Beans – Six Purchasing Tips.

3.

Use RDT by giving them a spritz of water and stirring them. Moisture reduces static electricity, clumping, retention and waste and produces stronger flavours (read the paper).

4.

Grind your frozen coffee; do not defrost it.

5.

Put a drip stand over your cup or carafe, put the cup on the scales, sit the brewer on the stand, and tare. You are weighing the coffee you actually get, not the water you pour. On a Switch or a Clever, close the valve first. If you use Cafec papers, the settings above show which one suits this roast.

6.

Bloom. Pour straight from the kettle, without the Melodrip, about three times the dose of water. Stir with a wet WDT stick so every ground is wet and no dry clumps are left, then wait for the bloom time shown above. Just like pre-infusion in espresso, this is where most of the extraction happens, and fresh coffee needs time to degas. You are NOT in a hurry.

7.

I recommend using a Melodrip, pouring in multiple small batches, and keeping the water level just above the coffee bed. Swap out the cup when it reaches the yield you chose. The last of the drawdown is the most bitter part, so you lose nothing.

Switch or Clever: pour through the Melodrip with the valve closed, then open it and aim to reach the yield around the brew time. V60, Kalita, Origami, Deep 27 or cloth: aim to reach the yield around the brew time. Don’t chase it to the second.

8.

Now, the most crucial step. Swirl the coffee, dip a teaspoon in and taste. Is the coffee sour? If so, next time you make this coffee, extract more using the recipe indicated by the button above.

9.

If the coffee isn’t sour, ask yourself whether it is very bitter. Bitterness is harder to judge because all coffee is bitter to some extent. However, you can reduce bitterness by extracting less. Go too far, and it will turn sour. You are looking for the calm spot in between. If you need to reduce bitterness next time you make this coffee, extract less by using the recipe indicated by the button above.

10.

Making a big brew? Past about 500 ml the bed gets deeper, drains slower and extracts more, so expect to step towards Extract less, or grind a little coarser.

Filter equipment

I only endorse equipment I have purchased myself, and I do not earn a commission or have any links to the companies I recommend. 

An example of a coffee I'm drinking

La Mandarina – Irene Herrera, Marshell, La Coipa (Peru)

An elegant, clear washed Peruvian that stood out on Ozone’s cupping table, made by a producer whose home their head roaster had already visited years earlier.

Elegant & juicy – La Mandarina reminds us of tangerine, strawberry fondant, brown sugar and lime

 

About the producer

Irene Herrera farms La Mandarina with her husband, Milciades Minga, who heads the Gallitos de Rocas growers’ committee. Ozone buys through its exporter partner Origin Coffee Lab.

About the region

La Coipa is a district in the north-east of Peru’s Cajamarca region, a high, green area known for some of the country’s best coffees.

About the coffee

ORIGIN: LA COIPA, CAJAMARCA, PERU
FARM: LA MANDARINA
PRODUCER: IRENE HERRERA
ALTITUDE: 1,750–2,000 MASL
VARIETY: MARSHELL
PROCESS: WASHED

About the variety

Marshell is a less common variety grown in northern Peru. Here it gives a surprisingly elegant, clean cup.

About the process

Washed coffees have the fruit removed before drying, so the cup is shaped by the variety and the farm rather than by fermentation. They tend to taste clean, clear and bright.

About the Roaster

Ozone Coffee started in New Plymouth, New Zealand, and also roasts in London. It buys many of its coffees through long-term relationships with exporters and producers.

Irene Herrera, La Mandarina – Ozone Coffee

Model Version:

20261009.06

How you can help

I have a dream: that this might raise the standard of coffee-making globally, reduce dialling in waste, time, and frustration, and encourage people to explore more varieties and pay more attention to the producers. You might even be prepared to pay more for better coffee if it pleases you, returning more money to growers.

You can help. The best thing you can do is spread the word on other platforms, such as Reddit or Facebook coffee forums, and share with others how this method can solve everyday problems.

Using 0.1g accurate scales and the recommended 100ml measuring cylinder, and entering quality data into the form, helps improve the model. So does evidence-based feedback for parameter range adjustments.

You can also support the site financially via Buy me a coffee to help with ongoing running costs, site hosting fees, and plug-in subscriptions.