Filter Coffee Recipe Series - Recipe 68

0.

397

gm/l

Extraction scale from least to most, with an X marking where espresso recipe 68 sits

If you haven’t measured your beans, treat this recipe as a starting guess. If you have, it’s usually right first time, and almost always within one change. The filter coffee recipe series is designed for this: taste your cup, then move up the series for more extraction or down for less. It works the same whether you brew with a V60, a Switch, a Kalita, an Origami or a cloth drip pot. Don’t hesitate to experiment with another recipe based on your taste test results—finding what tastes best for you is worth it!

Filter Coffee Recipe Series Settings

Hario V60 Switch dripper with a paper filter, brewing coffee into a cup on scales

Yield

190

ml

12.4

gm

15.4

DF54

58

Option-O P64

4.6

93

°C

03:07

min

215

°C

Medium/American

Filter directions

Don’t get hung up on the details. A Switch, a V60, a Kalita, an Origami, a Deep 27 or a cloth drip pot: the settings are the same. If you don’t have the right grinder, or you don’t know what that grind size even means, it doesn’t matter.

Providing you are changing the dose, the ratio, the bits you can, you will be changing the TASTE, and that is what matters. YOU are finding a RECIPE that tastes better than the last recipe you tried.

1.

Pre-heat. Rinse the paper filter with hot water to wash out the paper taste and heat the brewer, then tip the rinse water out of your cup or carafe. Using cloth? Rinse it, wring it out, and never let it dry out between brews; keep it in water in the fridge.

2.

Get your single dose out of the freezer. If you are not single-dosing and freezing your coffee, read How to Store Coffee Beans – 9 tips. While at it, read Best Coffee Beans – Six Purchasing Tips.

3.

Use RDT by giving them a spritz of water and stirring them. Moisture reduces static electricity, clumping, retention and waste and produces stronger flavours (read the paper).

4.

Grind your frozen coffee; do not defrost it.

5.

Put a drip stand over your cup or carafe, put the cup on the scales, sit the brewer on the stand, and tare. You are weighing the coffee you actually get, not the water you pour. On a Switch or a Clever, close the valve first. If you use Cafec papers, the settings above show which one suits this roast.

6.

Bloom. Pour straight from the kettle, without the Melodrip, about three times the dose of water. Stir with a wet WDT stick so every ground is wet and no dry clumps are left, then wait for the bloom time shown above. Just like pre-infusion in espresso, this is where most of the extraction happens, and fresh coffee needs time to degas. You are NOT in a hurry.

7.

I recommend using a Melodrip, pouring in multiple small batches, and keeping the water level just above the coffee bed. Swap out the cup when it reaches the yield you chose. The last of the drawdown is the most bitter part, so you lose nothing.

Switch or Clever: pour through the Melodrip with the valve closed, then open it and aim to reach the yield around the brew time. V60, Kalita, Origami, Deep 27 or cloth: aim to reach the yield around the brew time. Don’t chase it to the second.

8.

Now, the most crucial step. Swirl the coffee, dip a teaspoon in and taste. Is the coffee sour? If so, next time you make this coffee, extract more using the recipe indicated by the button above.

9.

If the coffee isn’t sour, ask yourself whether it is very bitter. Bitterness is harder to judge because all coffee is bitter to some extent. However, you can reduce bitterness by extracting less. Go too far, and it will turn sour. You are looking for the calm spot in between. If you need to reduce bitterness next time you make this coffee, extract less by using the recipe indicated by the button above.

10.

Making a big brew? Past about 500 ml the bed gets deeper, drains slower and extracts more, so expect to step towards Extract less, or grind a little coarser.

Filter equipment

I only endorse equipment I have purchased myself, and I do not earn a commission or have any links to the companies I recommend. 

An example of a coffee I'm drinking

Hacienda La Esmeralda, Mario Arriba – Peterson Family, Geisha (Panama)

A Geisha from the farm that made the variety famous. A rare chance to taste the original Panama Geisha estate.

Floral & fruity – Mario Arriba reminds us of florals, raspberry and Gamay

 

About the producer

Hacienda La Esmeralda is owned by the Peterson family. In 2004 their Geisha stunned judges at the Best of Panama competition and changed specialty coffee. This lot comes from the Mario Arriba plot in the Jaramillo section.

About the region

Jaramillo is a high area of Boquete, in Panama’s Chiriquí highlands, known for volcanic soils, cool mists and some of the world’s most prized coffee. This lot grew at 1,650 metres.

About the coffee

ORIGIN: BOQUETE, CHIRIQUÍ, PANAMA
FARM: HACIENDA LA ESMERALDA, JARAMILLO, MARIO ARRIBA
PRODUCERS: PETERSON FAMILY
ALTITUDE: 1,650 MASL
VARIETY: GEISHA
PROCESS: ANAEROBIC NATURAL

About the variety

Gesha comes from Ethiopia and became famous after Panama’s Hacienda La Esmeralda showed off its jasmine and bergamot florals in 2004. It is now grown in small amounts across Latin America.

About the process

A natural dries the whole cherry before the bean is removed, which gives sweet, fruit-forward cups with more body than a washed coffee. Here the cherries were also fermented without oxygen first.

About the Roaster

Hydrangea Coffee roasts in Berkeley, California, and is known for very light roasts of rare and competition-grade lots.

La Esmeralda Mario Arriba – Hydrangea Coffee

Model Version:

20261009.06

How you can help

I have a dream: that this might raise the standard of coffee-making globally, reduce dialling in waste, time, and frustration, and encourage people to explore more varieties and pay more attention to the producers. You might even be prepared to pay more for better coffee if it pleases you, returning more money to growers.

You can help. The best thing you can do is spread the word on other platforms, such as Reddit or Facebook coffee forums, and share with others how this method can solve everyday problems.

Using 0.1g accurate scales and the recommended 100ml measuring cylinder, and entering quality data into the form, helps improve the model. So does evidence-based feedback for parameter range adjustments.

You can also support the site financially via Buy me a coffee to help with ongoing running costs, site hosting fees, and plug-in subscriptions.